Variable Frequency Drive Water Pump

Variable frequency drive water pump is a high efficiency and energy saving pump suitable for home, hotel, school and other application scenarios
Send Inquiry
Description
Products Description

 

Variable frequency drive water pump with superior performance and rich function, can meet the requirement of water supply in different occasions and improve the quality of water supply system to achieve the effect of energy saving and environmental protection.

 

Main Features:

 

Delivery Head: Max.54m

Flow:Max.12m³/h

Start/stop the pump automatically

Variable frequency drive to lower pump power consumption

Integrated matching design

Medium Temperature:+15-70%

 

Operation conditions

 

This product is designed for indoor use. lf you want to install the product on outdoor areas, prepare facilities that can provide the product with protection against rain, wind and low temperature.

Medium : Clean water,temperature : +15C~+70C .

Notes: You must extract the air inside the pump for the first use.

 

Protection Function:

 

Sensor open circuit protection

protection function: Over-Current, Over-Voltage, Low-Voltage, Phase-Failure and Over-land etc.

 

What's the application of variable frequency drive water pump?

This pump applicable to Villa, School, Hotel, Sauna Room, Garden Irrigation, etc.

 

Why more people choosing variable frequency drive water pump?

1.Start /stop the pump automatically and free debugging

2.Variable frequency drive to reduce pump power consumption

3.Integrated matching smooth operation low noise design

4.High efficiency, saving 20% energy more than exist variable frequency pump

5.The fluid pass parts are stainless steel 304

6. Smart constant pressure water supply.

7. Automatic sleep when no water using.

8. High water pressure, low water pressure alarm function.

9. Multiple fault alarm functions.

10. Frost protection function.

1

Model

Input Voltage

Output Power

(kW)

Current

(A)

Head

(m)

Flow

(m3/h)

Threaded Bore

(Inlet/Outlet)

B1100-MLH20311-S20007

 

Single Phase 220V
50/60Hz

0.55

2.0

37

2

G1/G1

B1100-MLH3041-S2001

0.75

3.2

42

3

G1/G1

B1100-MLH8201-S20025

1.85

7.9

36

8

G1.5/G1.5

 

2

 

Installation/Test-Operation of the Product

 

Environmental Conditions

This Variable frequency drive water pump is designed for indoor use. If you want to install the product on outdoor areas, prepare facilities that can provide the product with protection against rain, wind and low temperature.

 

Installation Requirements

3

As shown in Figure 1, Figure 2, after installing and cleaning the pools, make sure to extract air. If the inside of the pump is filled with air, the pump may overheat by friction during operation to damage the internal parts.
The diameter of inlet pipe must be the same or large than the diameter of the pump inlet.
The inlet water level shall be higher than 2m from the center of the pump, as shown in Figure 1 and Figure 2. The inlet water level as shown in Figure 3 and Figure 4 is wrong.

Hot Tags: variable frequency drive water pump, China variable frequency drive water pump manufacturers, suppliers, factory, variable frequency drive water pump, pool water circulation pump, Automatic Water Pump, Vertical Multistage Pump, vertical multistage water pump, quality pool and spa pumps