MSLR150L series sewer lift pump station is a compact lifting equipment, mainly used to discharge single-family villas, townhouse superimposed villas, hotels, cinemas generated domestic sewage, suitable for large flow intermittent drainage places.

Products features

The container is corrosion-resistant and environmentally friendly polyethylene PE material, good tightness, durable, the box volume is 150 liters, reserved for multi-directional optional vertical and horizontal water inlet, easy to install.The cutting pump is external for easy installation and maintenance. Depending on the use scenario, there are 20 liters, 60 liters, 120 liters, 150 liters, 450 liters available.

Performance parameter

The sewer lift pump station is a non-blocking vortex impeller with an optional power of 1.5kw~2.2kw

Pump body material HT250

The material of vortex impeller is HT250, and the material of pump shaft is SUS410

Maximum overflow diameter 60mm

The maximum starting times of the pump is 60 times/hour

The cable length between the standard controller and the pump/float is 5 meters

Includes DN80 check valve

Starting mode: Pressure/float double level control, original double protection

Waterproof grade: IP68(excluding control box)

Float resistant fixed mounting (anchor bolt)

Application

(Difference from built-in sewage lifting station)

1.Building Type:

Built-in sewage lift pump station: mainly used to treat sewage generated inside residential, commercial buildings, factories and other buildings. Suitable for individual buildings, it is able to raise sewage from the bottom of the building to the level of the urban drainage system.

External sewer lift pump station: More suitable for serving large buildings, urban drainage systems, and industrial areas. Able to treat large amounts of sewage and raise it to appropriate levels.

2.Size and capacity:

Built-in sewage lift pump station: Usually designed to meet the needs of a single building, its capacity is relatively small and suitable for relatively small flows and displacements.

External sewer lift pump station: due to the wider range of services, the capacity is usually larger, able to handle large-scale sewage flow, suitable for urban or regional drainage systems.

3.Environmental adaptability:

Built-in sewage lift pump station: The design pays more attention to the internal space restrictions of the building, and has strong adaptability, but is limited by the structure of the building.

External sewer lift pump station: Because it is installed outside the building or in the urban environment, it is relatively more flexible and can adapt to different geographical and environmental conditions.

4.Long-term maintenance and management:

Built-in sewage lift pump station: More frequent maintenance may be required because it is inside the building, and repairs and overhauls may have some impact on building operations.

External sewer lift pump station: May be easier to maintain and manage as they are generally more accessible and do not cause too much disruption to operations inside the building.

Technical Parameter List

Model	Power	Voltage	Current	Outlet Diame DN80	Lift(m)	2	4	6	8	10	12	14	16	18	20	22
Model	(KW)	(V)	(A)	Outlet Diame DN80	Lift(m)	2	4	6	8	10	12	14	16	18	20	22
MSLR150L150D	1.5	220	7.6	DN80	Flow (m³/h)	45	38	33	27	21	14	7
MSLR150L220D	2.2	220	11.2			50	45	41	36	31	26	20	12	7
MSLR150L150D	1.5	380	3.2			45	38	33	27	21	14	7
MSLR150L220D	2.2	380	5.8			50	45	41	36	31	26	20	12	7