Design description
Compact horizontal single end suction centrifugal water pump, installation form is as follows:
- Complete pump with base plate (standard installation method)
- Complete pump with pad iron (suitable for occasions with good ground foundation flatness)
- Complete end suction centrifugal pump without base plate and pad iron (suitable for units and supporting equipment)
- Adopts rigid coupling integrated design, more compact structure
- The motor uses thrust bearing to effectively offset the influence of impeller axial force
- A variety of materials are available
Application
- Pumping clean or slightly polluted water (max 20ppm) without solid particles for circulation, transportation and boosting water supply
- Pumping water quality requirements meet VDI2035 standard hot water, water-ethylene glycol mixture, cooling water/cold water, seawater and industrial water
- Applied in municipal water supply, irrigation, buildings, general industry, power stations, etc.
- Water circulation for air conditioning and HVAC systems
- Industrial water treatment
- Agricultural irrigation
- Fire water supply system
- Light industrial production process
Features
Compact structure:
- The end suction centrifugal water pump body is compact and often adopts an integral structure with the motor to save space.
- No complex infrastructure is required and installation is simple.
Horizontal design:
- The end suction centrifugal water pump shaft is placed horizontally, suitable for various industrial pipeline layouts.
- The suction port of the pump is located on the side (end suction) and the discharge port is at the top, which is convenient for pipeline connection.
- Equipped with a base and a pad, it is more stable to use
Single-stage design:
- The impeller is a single-stage design. The liquid enters the impeller from the suction port and is directly pressurized and discharged.
- Applicable to a variety of head conditions.
A variety of materials are available:
- The end suction centrifugal pump body and impeller are usually made of cast iron, stainless steel, bronze and other materials. Different materials can be selected according to the characteristics of the medium.
materials of end suction centrifugal water pump
| Pump housing (standard) | Gray cast iron |
| Pump housing (special) | Ductile cast iron/ Stainless steel |
| Connecting bracket | Gray cast iron |
| Impeller(standard) | Gray cast iron |
| Impeller (special) | Ductile iron/ Stainless steel/ Bronze |
| Wear ring (standard) | Gray cast iron |
| Wear ring (special) | Stainless steel/ Bronze |
| Pump shaft (standard) | SS420 |
| Pump shaft (special) | SS431 |
| Mechanical seal |
AQ1EGG(Carbon/silicon carbide/EPDM) Aluminum Carbide/Graphite |
| Other mechanical seal | Depending on the liquid |
technical parameters
| Power | 1.5~250 KW |
| Flow | 1.5~520 m³/h |
| Head | 4~158 m |
| Enercy efficiency class |
GB18613-2012 CL3 DB18613-2012 IE3 |
| Revolving speed (rpm) | 1450/2900 |
| Motor ≤3KW | 220V △/380V,50HZ |
| Motor ≥4KW | 380V △660V,50HZ |
| Protection level | IP55 |
| Insulation grade | F |
| Other voltage/Frequencies | Special version at additional charge |
Structure diagram
| 1 | Motor | 2 | Connecting bracket |
| 3 | Shaft | 4 | Mechanical seal |
| 5 | Wear ring | 6 | Impeller |
| 7 | Pump housing | 8 | Pump cover |
| 9 | Pedestal |
For more information and directory, please contact us, or you can scan the QR code below to contact us via WhatsApp and WeChat：
Hot Tags: end suction centrifugal water pump, China end suction centrifugal water pump manufacturers, suppliers, factory, quiet air blower, high volume air blower, vfd booster pump, pool water circulation pump, home macerator pump, handheld pool pump
