Glass cleaner pump is usually used to clean glass windows, curtain walls, glass curtain walls, mirrors and other surfaces. It may include cleaning brushes, water spray systems, water absorption equipment, etc. to effectively remove dirt, dust, water stains, etc. on the glass surface.
Some equipment only Use advanced technology including ultrasonic cleaning or steam cleaning.
Glass cleaner pump is widely used in buildings, automobiles, industrial equipment and other fields.
Pump selection
Circulation pump: It is suitable for circulating cleaning liquid. It absorbs the cleaning liquid from the tank or water source, transports it to the cleaning brush or water spray system through pipelines, and then flows back to the liquid storage tank to form a cycle. This helps maintain circulation of the cleaning liquid and improves cleaning efficiency, especially for large glass surfaces. LP series circulation pump is suitable for glass cleaner pump.
Click It
Pressure pump: Mainly used to provide stronger cleaning pressure. By increasing the pressure of water, the cleaning liquid can more effectively wash the glass surface and remove attached dirt. When dealing with stubborn stains or when it is necessary to reach a certain spray height when cleaning the exterior walls of high-rise buildings, you can choose a high-power and high-lift pressure pump. The strong pressure can easily solve stubborn stains.
Precautions
Cleaning agent selection: Choose the appropriate cleaning agent to ensure effective removal of dirt without damaging the glass surface
Equipment debugging: Select circulation pumps and pressure pumps with appropriate voltage and power, and check the status of the pumps before use, as well as the working status of various parts such as cleaning brushes, water spray systems, and water suction equipment.
Safety measures: Follow safe operating procedures and ensure that users are familiar with operating procedures and emergency response measures, especially when cleaning at high altitudes.
Cleaning frequency: Specify a reasonable plan based on needs and environmental conditions to avoid excessive cleaning
Ambient temperature: Too low or too high ambient temperature will affect the cleaning effect. The maximum recommended ambient temperature for circulation pumps and pressure pumps is generally 40 degrees Celsius. Exceeding this temperature may cause equipment power failure.
Equipment maintenance: Regularly check various parts of the glass cleaner pump and replace easily worn parts in a timely manner
Water quality: Use a clean water source and avoid hard water or water containing a lot of impurities to prevent water stains or scale. If necessary, you can install an additional water filtration system or sand tank.
Our factory
