Pressure Power Pump For Swimming Pool And Bathroom

By using a hot water circulation pump in the bathroom, the shower water pressure is increased, making the shower more comfortable, and the hot water can be quickly delivered to the bathroom, reducing waiting time; swimming pools generally use large circulation pumps and swimming pool pumps, and the pressure power pump can be selected according to the size of the venue. parameters and quantities.

The pressure pump for bathroom is designed for hot water supply(up to +90℃) and pressure boosting in residential and commercial applications,they are suitable for solar energy hot water system or other types of hot water systems.

• All-in-one unit,consisting of pump,motor pressure tank, and electronic controller. The built-in electronic controller provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.
• Compact design and quiet operation
• Manufactured with non-corrosive rust proof materials
• Special design corrosive resistant pressure tank with good appearance.
• Appropriate reliable check valve with silent operation.
• Compact design, small size, easy installation.
• Every pumps tested in our factory to ensure quality and reliability.
• High performance, electricity saving motor with patented cooling construction. Build-in thermal overload protector for motor burnt out protection.
• Pump has built in dry-run shut off with automatic reset function
• The EQ has an anti-cycling feature which prevents the pump from continuous starting and stopping when you have a dripping tap or minor leak in the system.

1. Do not install the pressure power pump in the sun baked or wet place.
2. Install the pump to near the water source as short as possible to have a shortest suction pipe and prevent from reducing the suction.
3. Position the pump using the brackets.
4. Install the pump in dry and ventilated place to ensure safe operation.
5. Try to reduce the pipe circuit as you can, the gradient should less than 2%.
6. The connection of pipe circuit should be water-tight, the pipes should be supported separately.
7. It's a appreciated to install a vacuum meter and pressure gauge in the suction and discharge to observe the situation of operation.

● Swimming pool pump: Different specifications are available according to the size of the site. The plastic impeller is corrosion-resistant and can be used in swimming pools that simulate seawater environments. It is also equipped with a filter basket that can filter larger dirt and impurities such as leaves.

● Circulation pump: used to circulate the water body to ensure uniform distribution of water quality, avoid stagnant water areas, and prevent uneven distribution of chemical substances in the water. It is suitable for the needs of large swimming pools.

● Filter pump: used for secondary filtration after filtration by the swimming pool pump, which can clean impurities and pollutants in the water to ensure clean water quality.