Subway Pump For MTR Sewage Lift

● Sealed, no smell, environmentally friendly and hygienic

● Compact structure, saving space

● Quick and easy installation

● The water collection tank interface and the pipeline are flexibly connected with rubber hoses, which can reduce noise and vibration to a limited extent.

● Soft seal gate valves are installed at the inlet and outlet of the subway pump to facilitate maintenance.

●  By installing a manual diaphragm pump (optional), the sewage in the water collecting tank can be manually drained when the electric pump fails or is repaired.

●  Dual pump configuration, mutual backup; if the sewage inflow exceeds the flow range of a single pump, the other one can be put into operation as a supplementary pump.

●  The liquid level sensor adopts air pressure + alarm float, ultrasonic liquid level meter + alarm float or float control methods.

● The subway pump adopts an innovatively designed dry spiral cutting pump, which greatly improves the passage capacity of dirt, is non-blocking and is easy to maintain.

● The water pump can be selected as a horizontal pump or a vertical pump according to needs.

● You can also choose a cyclone pump, which is suitable for situations where there are too many solid objects.

● Use a motor that can withstand frequent starting current shocks, with a protection level of IP68, and can still operate normally even when completely submerged.

● Uniquely designed cooling structure ensures efficient heat dissipation of the motor.

● Automatic flushing function to prevent sedimentation and blockage, water outlet diameter DN80 (variable diameter).

● The standard cable length between the controller and the water pump/control line is 10 meters (the cable length can be customized).